ЭЛЕКТРОННЫЕ ТРУБКИ S

Электровакуумный прибор Герца для количественных исследований неупругих столкновений электронов с атомами инертных газов, определения энергии ионизации и энергий возбуждения, соответственно, гелия и неона, разрешения энергетических состоян ... еще

Tube holder to support all S series (student) electron tubes for easy and safe operation. The five pin sockets for the tube are concealed inside the tube holder. A cathode protection switch is integrated into the tube holder, to protect the ... еще

Pair of Helmholtz coils for generating a uniform magnetic field perpendicular to the axis of the Teltron S series tube. Teltron Tube Holder S allows the coils to be configured in the Helmholtz geometry or at variable distances ... еще

Highly evacuated electron tube with thermionic cathode and anode for investigating the thermoelectric effect (Edison effect) and measuring the emission current as a function of the heating power applied to the cathode. Also for plotting diode ... еще

Highly evacuated electron tube with thermionic cathode, control grid and anode for quantitative investigation of controllable high vacuum tubes, plotting the characteristics of a triode, demonstrating the negative polarity of the electron charge ... еще

For investigating luminescence during and after electron bombardment of a phosphorous anode, as well as excitation of fluorescence and phosphorescence. Luminescence can also be observed following irradiation of the phosphorous anode with ultraviolet ... еще

Highly evacuated electron tube with divergent electron gun, fluorescent screen and Maltese cross. For demonstrating the straight line propagation of electrons in the absence of any electric or magnetic field by projecting the shadow of a Maltese ... еще

For demonstrating the negative polarity of electron beams through magnetic and electric deflection of the beams toward a laterally positioned Faraday cage connected with an electroscope (for example, U17250) for this purpose. Also for investigating ... еще

The Teltron Thomson Tube S is used to investigate electron beams in electric and magnetic fields.  Experiment Topics: • Investigate the deflection of an electron beam by a magnetic field • Estimate the specific charge ... еще

Electron tube filled with low pressure helium gas, with thermionic cathode, control grid, and anode for quantitative investigations of the typical properties of a gas-filled triode, recording the IA - UA characteristics of a thyratron, observing ... еще

For quantitative investigations of the typical properties of a gas-filled triode, recording the IA - UA characteristics of a thyratron. Observing independent and dependent discharges as well as discontinuous energy release of Ne atoms during ... еще

Эта трубка подходит только для использования с блоком управления 1008506! Электровакуумный прибор Герца для количественных исследований неупругих столкновений электронов с атомами инертных газов, определения энергии ионизации и энергий ... еще

Part evacuated electron tube, filled with neon at low pressure, with tangential and axial electron gun. For determining specific charge e/m from the diameter of the filament beam in the case of tangential bombardment and a perpendicularly aligned ... еще

Сильно вакуумированный электровакуумный прибор для демонстрации волновой природы электронов путем наблюдения интерференции, вызванной прохождением электронов через решетку поликристаллического графита (дифракция Дебая-Шеррера) и визуализир ... еще

For observing the phenomena occurring during electrical discharges in a gas in accordance with its pressure and type, cathode glow, positive column and canal rays. Either end of the discharge tube is equipped with a fluorescent screen. Demountable ... еще

The quality of the electron beam in electron defraction tube S (1013889) is affected by the resistance between sockets C5 (cathode) and F4 (heating filament) on the tube. For optimum results, the resistance needs to be 390 kΩ. Tube holder S ... еще