The 3B Artificial Hard Stool, categorized under Bristol Stool Chart Type I, is generally designed to enhance the realistic simulation of digital rectal faeces removal.
The product comes in a set of 5 (4 Hard Stools) with 20 pieces of Hard ...
more
The Complete Baby set for birth simulators, P90 Basic and Pro, contains a fully jointed baby (49 cm / 19,29 inch - 1,06 kg / 2,3 lbs), an umbilical cord with 2 clamps and a placenta. In connection with the birth simulator, fetal positions and ...
more
For use with Chester Chest with Standard Arm - 1021821
The Standard Arm for Chester Chest has a dual lumen 5Fr PICC (Peripherally Inserted Central Catheter) exiting the basilic vein from the inner bicep area and a pre-positioned 20g IV ...
more
Skin Graft Wound Board is a realistic patient simulation model for educating various individuals about skin grafts and their care. Wound cleansing, measurement, and dressing changes can all be easily reviewed and practiced on this model. The ...
more
Dehisced Wound Board is a realistic patient simulation model for educating various individuals about dehisced wounds and their care. Wound cleansing, measurement, and dressing changes can all be easily reviewed and practiced on this model. ...
more
This Incision Wound Board is a realistic patient simulation model for educating various individuals about Incision wounds and their care. Wound cleansing, measurement, and dressing changes can all be easily reviewed and practiced on this model ...
more
Replacement foreskin for Willi, Remedy's male catheterization trainer. Available in light or dark skin tone.
SKU: REM-CATH-FOR-01 ( light skin tone) REM-CATH-FOR-01D (dark skin tone)
more
Use Gravity Boots with the 3009454
One Size Fits Most: Boot straps adjust to ankles varying several inches in diameter , XL Gravity Boot also available note in comment box during checkout
Flexible Shell for Comfortable Fit: Tough ...
more
Clear ultrasound gel couplant for therapeutic and diagnostic ultrasound and neuromuscular electrical stimulation. Includes 1, 5 liter container of ultrasound gel.
Alcohol and salt free as well as non corrosive.
Also available in a case ...
more
Replacement mercury tube for the following products:
Franck-Hertz tube with Hg filling and heating furnace (115 V /50/60 Hz);
item no. : 1006794 or 1023094
and
Franck-Hertz tube with Hg filling and heating furnace ...
more
Replacement Franck-Hertz mercury tube (mounted on support plate) for the following products:
Franck-Hertz tube with Hg filling and heating furnace (115 V /50/60 Hz);
item no. : 1006794 or 1023094
and
Franck ...
more
New, worldwide unique spine and skeleton stand! This stand...
• Can be placed on the floor
• Or mounted on a wall!
• Made of nickel-plated steel
This stand works great for 3B Scientific spines and hanging skeleton models ...
more
The neuron cell body depicts a part of the human nervous system in colorful anatomical detail. The neuron model features a typical neuron body with cell organelles, for example mitochondria and many other characteristics of the human cell, ...
more
This myelin sheath model shows the glial cells which build the insulating layer around the axons of the central nervous system. The myelin sheath model is a great addition to any lesson about the human nervous system.
more
This section of the nervous system depicts a Schwann cell with sectioned core. The model depicts the schwann cell in colorful anatomical detail. The schwann cell model is a great addition to any lesson on the human nervous system.
more
The motor end plate model depicts the neuromuscular junction with striated muscle fiber. The motor end plate of the human nervous system is depicted in colorful anatomical detail. The motor end plate model is a great addition to any lesson ...
more
The synapse model features the endoplasmic reticulum, mitochondria and the membranes of the synaptic gap. Also depicted by the synapses model are 5 smaller relief models of the main synapse variations. This synapse model is a great addition ...
more
2 part lower incisor tooth with longitudinal section. This lower incisor tooth is an accurate representative of adult dentition.
The D10 series range from 23-29 cm high.
more
This 2 part lower canine tooth has a longitudinal section. The lower canine tooth is an accurate representation of adult dentition.
The D10 series range from 23-29 cm high.
more
This model is the Lower Single-Root Pre-Molar tooth. The Lower Single-Root Pre-Molar tooth is an accurate representation of adult dentition.
The D10 series range from 23-29 cm high.
more
This 2 part lower twin-root molar has a longitudinal section. The Lower Twin-Root Molar displays cavities. The tooth is a accurate representation of adult dentition.
The D10 series range from 23-29 cm high.
more
The upper triple-root molar tooth is 3 part with longitudinal sections. The tooth has cavity inserts. The upper triple-root molar tooth is an accurate representation of adult dentition.
The D10 series range from 23-29 cm high.
more
This upgrade kit easily converts a P11/1 Patient Care Manikin Basic to a P10/1 Pro version. Save money and upgrade your patient care manikin for more learning and teaching opportunities!
The kit includes:
Lung
Bladder
...
more
High-quality, lifelike and anatomically correct specimens of a house mouse and of a mouse skeleton,which have been prepared by technicians who have been trained at the highest level. Only in this way isit possible to ensure the durability of ...
more
Bone preparation of a pigeon skeleton and, for comparison, a pigeon that is prepared to be lifelike and covered with real feathers. The longevity of the specimen is assured thanks to the frst-class preparation work. In display case.
Dimensions ...
more
'
data-item-price="61.0000"
href="https://www.3bscientific.com/ca/plane-mirror-component-of-optics-kit-for-whiteboard-1002984-u15510-3b-scientific,p_171_1183.html">Plane Mirror -
Component of 'Optics Kit for Whiteboard'
$ 61.00
Item: 1002984 [U15510]
'
data-item-price="61.0000"
data-href="https://www.3bscientific.com/ca/plane-mirror-component-of-optics-kit-for-whiteboard-1002984-u15510-3b-scientific,p_171_1183.html"
>
Application Area:
This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ).
Product ...
'
data-item-price="61.0000"
href="https://www.3bscientific.com/ca/plane-mirror-component-of-optics-kit-for-whiteboard-1002984-u15510-3b-scientific,p_171_1183.html">more
Application Area:
This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ).
Product ...
more
Application Area:
This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ).
Product ...
more
Application Area:
This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ).
...
more
Application Area:
This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ).
Product ...
more
Application Area:
This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ).
...
more
Application Area:
This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ).
Product ...
more
Application Area:
This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ).
Product ...
more
Spoked wheel suitable for use as a pulley with the trolley track. It can be used in combination with a light barrier (item code: 1000563) for recording the motion of a trolley.
more
This product is a component of the 'Mechanics Kit for Whiteboard' (item no.: 1000735).
Aluminium block with a teflon-coated surface and 2 hooks.
Dimensions: 55 mm × 50 mm × 25 mm
more
Aluminium ring with a blade for determining the surface tension of liquids. Includes a hook and three threads for suspension from a dynamometer.
The tear-off force in liquids is easy to determine, which is why students can conduct the experiment ...
more
Lenses made of high-quality optical glass. Breakage and impact-resistant, set in a slide with magnetic base.
Dimensions: 70x70 mm²
Lens diameter: 36 mm
f = +300 mm
more
Lenses made of high-quality optical glass. Breakage and impact-resistant, set in a slide with magnetic base.
Dimensions: 70x70 mm²
Lens diameter: 36 mm
f = +100 mm
more
Lenses made of high-quality optical glass. Breakage and impact-resistant, set in a slide with magnetic base.
Dimensions: 70x70 mm²
Lens diameter: 36 mm
f = +50 mm
more
Lenses made of high-quality optical glass. Breakage and impact-resistant, set in a slide with magnetic base.
Dimensions: 70x70 mm²
Lens diameter: 36 mm
f = -100 mm
more
Object holder with magnetic base to accommodate optical apertures in slides (50x50 mm2), e.g. single slit N (U8470870) or triple/quintuple slit N (U8478110).
more
Metal rail with millimetre scale and guide slots for accommodating optical components on a magnetic base.
Dimensions: 400x75x10 mm³
Weight: 230 g approx.
more
Single slit slide for mounting in N-model object holder or in the filter slot of the N-model parallel light optical lamp to use in optical experiments requiring a tight single beam.
Dimensions: 50x50 mm²
more
Optical bench made of black anodised aluminium profile with printed millimetre scale.
Cross-section: 70x30 mm² approx.
Length: 500 mm
Weight: 0,6 kg
more
Optical bench made of black anodised aluminium profile with printed millimetre scale.
Cross-section: 70x30 mm² approx.
Length: 1000 mm
Weight: 1,2 kg
more
Optical rider for K-model optical benches (U8475337 and U8475336). With two clamps for diaphragms from the Kröncke optical system or for plates up to 2 mm thick.
Dimensions: approx. 40x50x35 mm³
Weight: approx. 70 g
more
Halogen lamp in cylindrical housing attached to diaphragm screen (100x100 mm²) for mounting on K-model optical riders (U8475350). The filament can be aligned horizontally or vertically.
Halogen lamp: 12 V, 20 W
Terminals: 4 mm safety sockets ...
more
Simple transformer for student exercises. Short circuit proof, with connection leads and two cascadable 4 mm safety plugs.
Safety transformer conforming to EN 61558-2-6
Safe isolation between power supply and output circuits
Specifications ...
more
Simple transformer for student exercises. Short circuit proof, with connection leads and two cascadable 4 mm safety plugs.
Safety transformer conforming to EN 61558-2-6.
Safe isolation between power supply and output circuits.
Specifications ...
more
Tough clamp for diaphragms, filters, diffraction objects and other objects in a slide frame. On diaphragm screen 100x100 mm².
Clamping range: 0.2 – 4 mm
Dimensions: 100x100 mm²
Round opening: 38 mm dia.
more
Lenses made of high-grade optical glass. Shock-proof and crack-proof installation in optical diaphragm (100x100 mm²). With focal length specification.
Dimensions: 100x100 mm²
Lens diameter: 32 mm
more
Lenses made of high-grade optical glass. Shock-proof and crack-proof installation in optical diaphragm (100x100 mm²). With focal length specification.
Dimensions: 100x100 mm²
Lens diameter: 32 mm
more
Lenses made of high-grade optical glass. Shock-proof and crack-proof installation in optical diaphragm (100x100 mm²). With focal length specification.
Dimensions: 100x100 mm²
Lens diameter: 32 mm
more
Lenses made of high-grade optical glass. Shock-proof and crack-proof installation in optical diaphragm (100x100 mm²). With focal length specification.
Dimensions: 100x100 mm²
Lens diameter: 32 mm
more
Lenses made of high-grade optical glass. Shock-proof and crack-proof installation in optical diaphragm (100x100 mm²). With focal length specification.
Dimensions: 100x100 mm²
Lens diameter: 32 mm
more
Lenses made of high-grade optical glass. Shock-proof and crack-proof installation in optical diaphragm (100x100 mm²). With focal length specification.
Dimensions: 100x100 mm²
Lens diameter: 32 mm
more
Lenses made of high-grade optical glass. Shock-proof and crack-proof installation in optical diaphragm (100x100 mm²). With focal length specification.
Dimensions: 100x100 mm²
Lens diameter: 32 mm
more
Fresnel mirror with holder for use on K-model optical benches (U8475260, U8475240 or U8475230).
Two mutually inclined surface-coated mirrors are bonded to a common metal plate. A knurled screw at the rear can be used to adjust the angle between ...
more
Photographic diffraction object in a slide frame.
Single slit widths: 0.075 / 0.15 / 0.4 mm
Double slit width: 0.1
Double slit spacing: 0.5 mm
Dimensions: 50x50 mm²
more
Micrometer screw with fine tip for measuring diffraction and interference lines. Holder fits the optical rider K (U8475350).
Dimensions: approx. 80x30x60 mm³
Weight: approx. 120 g
more
Continuously adjustable slit on diaphragm screen 100x100 mm². The slit width can be adjusted by means of a micrometer screw.
Slit width: 0 – 3 mm
Slit height: 25 mm
Dimensions: 100x100 mm²
Weight: approx. 240 g
more
Slide with a triple and a quintuple slit arrangement for mounting in N-model object holder (U8470350) or in the slide slot of the N-model parallel light optical lamp (U8478080-230 or U8478080-115) to use in optical experiments requiring multiple ...
more
The heating chamber can be employed to conduct the Franck-Hertz experiment or the sodium resonance fluorescence experiment in safety. It consists of a powder-coated sheet steel casing with two viewing windows. The front plate is attached ...
more
The heating chamber can be employed to conduct the Franck-Hertz experiment or the sodium resonance fluorescence experiment in safety. It consists of a powder-coated sheet steel casing with two viewing windows. The front plate is attached ...
more
Plug-in power supply with 5.5x2.1-mm co-axial power connector.
Safety transformer conforming to EN 61558-2-6
Safe isolation between power supply and output circuits
Specifications:
Voltage: 12 V AC
Max current: 500 mA
...
more
Plug-in power supply with 5.5x2.1-mm co-axial power connector.
Safety transformer conforming to EN 61558-2-6.
Safe isolation between power supply and output circuits.
Specifications:
Voltage: 12 V AC
Max current: 700 mA
...
more
3B Comfort-Stim Elite Electrodes features a layer of pure silver (Ag) coated to our conductive carbon film for reduced impedance, superior conductivity, and uniform current dispersion. Our premium silver electrodes provide the patient with ...
more
This metal stand base features extraordinary stability and durability. The 5 large casters ensure that the stand is stable and easy to handle. The base is compatible with all 3B skeletons and the 3B muscle figures B50 and B51.
...
more