Fuente de alimentación de CC, lineal regulada,
1 – 30 V, 0 – 10 A

699,38 € IVA incluido

Envío gratuito a Península

Resumen de todos los experimentos en los que se utiliza el producto

Pregunta sobre producto

Descripción
Utilizado en los siguientes experimentos

High-quality, linear regulated DC bench power supply, particularly suitable for sensitive electronic circuits:
0–30 V, 0–10 A

PRACTICAL: Digital display of voltage and current
PRECISE: Coarse and fine voltage adjustment, adjustable current: 0 to 10 A or 0 to 1 A
USEFUL: Automatic operation with constant voltage or constant current
PROTECTED: Short circuit protection

Technical Data:_..

Voltage
Automatic operation:	Constant voltage
Adjustable:	0 to 30 V (0 to ± 5 mV) with fine adjustment (about 2 Volts)
Regulation:	< 40 mV for a load variation from 0 to 100%, < 25 mV for a 10% line variation
Ripple:	< 3 mV peak to peak or 1 mV rms
Internal resistance:	< 4 mΩ
Indicator:	Green LED for voltage regulation
Voltmeter:	14 mm 3-digit LED digital voltmeter
Resolution:	100 mV
Current
Automatic operation:	Constant current
Two selectable current ranges:	10 A or 1 A
Adjustable:	0 to 10 A or 0 to 1 A, depending on the selected range
Regulation:	< 10 mA for a 10% line variation, < 20 mA for a load change from 0 to 100%
Ripple:	< 10 mA peak to peak or 3.5 mA rms
Indicators:	Red LED for current regulation
Ammeter:	14 mm 3-digit LED digital ammeter
Resolution:	10 mA on 1A range, 100 mA on 10A range
Protection
Short circuit protection:	By current regulation
Overtemperature protection:	By fan, thermal circuit-breaker, and relay on the transformer
Overcurrent protection of the primary transformer:	By fuse
Other specifications
Output:	4 mm safety sockets
Ground connection:	Ground protection terminal with 4 mm plug
Mains input:	C14 socket with detachable 1.8m long C13 cable (2 poles + earth)
Input voltage:	230 V ±10%, 50/60 Hz
Power consumption:	620 VA
Safety:	Class I, enhanced safety between mains input and outputs. Complies with EN 61010-1, overvoltage category II, pollution degree 2
EMC:	Complies with EN 61326-1 and EN 55011, ISM Group I, Class B
Dielectric strength:	2300 V from input to output, 1350 V from input to chassis
Housing:	Powder-coated metal housing 285 x 219 x 150 mm³ with non-slip rubber feet
Weight:	10.8 kg