진동 및 파형을 기계적으로 발생시키는 진동 발생기(예: 코일 스프링, 고무 코드, 와이어 링 또는 클라드니 판과 함께 사용)입니다. 액세서리(클라드니 판, 공명 와이어, 고무 밴드 등)를 부착하기 위한 4mm 소켓이 있는 장착 핀이 포함된 견고한 플라스틱 하우징으로 제공합니다. 코일 스프링에서 정상파 시연을 위한 장치 후면 스탠드 로드용 홀더(최대 직경 8mm)가 포함되어 있습니다. 발생기에는 과부하 보호 기능이 내장되어 있습니다.
사양:
연결 방법: 4mm 안전 소켓으로 연결
임피던스: 8Ω
주파수 범위: 0 ~ 최대 20kHz
최소 작동 전류: 10mA
과부하 방지: 1A 퓨즈
크기: 약 200x160x70mm³
중량: 약 1.4kg
Vibration generator for exciting oscillating and waves mechanically, e.g. in coil springs, a rubber cord, a wire ring or a Chladni plate. In robust plastic housing including mounting pin with 4-mm socket for attaching accessories (Chladni plates, resonance wire, rubber band etc.). Including holder for stand rod (up to 8 mm dia.) on the rear side of the apparatus for the demonstration of standing waves in a coil spring. The generator is equipped with overload protection and is driven by a loudspeaker for smooth oscillations and fine travel stepping.
Specifications:
Connection: via 4-mm safety sockets
Impedance: 8 Ω
Maximum amplitude: 5 mm
Frequency range: 0 up to 20 kHz
Minimum operating current: 10 mA
Overload protection: 1 A fuse
Dimensions: approx. 200x160x70 mm³
Weight: aprox. 1.4 kg
Vibration generator for exciting oscillating and waves mechanically, e.g. in coil springs, a rubber cord, a wire ring or a Chladni plate. In robust plastic housing including mounting pin with 4-mm socket for attaching accessories (Chladni plates, resonance wire, rubber band etc.). Including holder for stand rod (up to 8 mm dia.) on the rear side of the apparatus for the demonstration of standing waves in a coil spring. The generator is equipped with overload protection and is driven by a loudspeaker for smooth oscillations and fine travel stepping.