ELECTRON TUBES S

Hertz electron tube for quantitative investigations of inelastic collisions of electrons with inert gas atoms, determination of ionization energies of helium, as well as resolution of the energy states of various primary and orbital angular ... more

Tube holder to support all S series (student) electron tubes for easy and safe operation. The five pin sockets for the tube are concealed inside the tube holder. A cathode protection switch is integrated into the tube holder, to protect the ... more

Pair of Helmholtz Coils for generating a uniform magnetic field perpendicular to the axis of the Teltron S series tube. Teltron Tube Holder S allows the coils to be configured in the Helmholtz geometry or at variable distances ... more

High-vacuum electron tube with thermionic cathode for demonstrating the thermoelectric effect (Edison effect). Use the tube to investigate the relationship between measured emission current and the voltage applied to the cathode. Also investigate ... more

High-vacuum electron tube with thermionic cathode and control grid for demonstrating the thermoelectric effect (Edison effect). Use the tube to investigate the practical applications of a triode as an amplifier and generating undamped oscillations ... more

High-vacuum electron tube with divergent electron gun and three, colored fluorescent strips. Demonstrate stimulated light emission during and after electron bombardment of a phosphorus anode. The anode also fluoresces when illuminated with ... more

High-vacuum electron tube with divergent electron gun aimed at a fluorescent screen partially obscured by a Maltese cross. For demonstrating the linear propagation of electrons in the absence of applied electromagnetic fields by projecting ... more

Highly evacuated electron tube with focusing electron gun and fluorescent screen inclined relative to the beam axis so that the path of the beam can be seen and the effects of electric and magnetic fields can be studied. The electron beam ... more

High-vacuum electron tube with high-accuracy electron gun and ruled target phosphorescent screen. Determine the fundamental electron charge-to-mass ratio (e/m), study mean electron velocities using field cancellation, and explore electron ... more

Electron tube filled with low-pressure helium gas, and containing a thermionic cathode, control grid, and anode. This tube is for quantitative investigations of the typical properties of a gas-immersed triode, recording the current-potential ... more

For quantitative investigations of the typical properties of a gas-filled triode, recording the IA - UA characteristics of a thyratron. Observing independent and dependent discharges as well as discontinuous energy release of Ne atoms during ... more

This tube is only suitable for use with the control unit 1008506! Hertz electron tube for quantitative investigations of inelastic collisions of electrons with inert gas atoms, determination of ionization energies of helium, as well as ... more

Part evacuated electron tube, filled with neon at low pressure, with tangential and axial electron gun. For determining specific charge e/m from the diameter of the filament beam in the case of tangential bombardment and a perpendicularly aligned ... more

Highly evacuated electron tube for demonstrating the wave nature of electrons through the observation of interference caused by passage of electrons through a polycrystalline graphite lattice (Debye-Scherrer diffraction) and rendered visible ... more

For observing phenomena (for example cathode glow, positive column, canal rays) that occur during electrical discharge in a variety of gases at various pressures. Either end of the discharge tube is equipped with a fluorescent screen, and ... more

The quality of the electron beam in electron defraction tube S (1013889) is affected by the resistance between sockets C5 (cathode) and F4 (heating filament) on the tube. For optimum results, the resistance needs to be 390 kΩ. Tube holder ... more