Electrochemistry Kit

A complete equipment set for basic experiments in electrochemistry. Includes a handy measurement device with an LCD display for pH values and practically zero-current measurement of voltages, as well as a pH combined electrode with a highly flexible cable. Automatic accumulator charging during mains operation with overload protection. Enclosed in a robust console housing with labeling on a resistant SKF inscription foil with a scratch-proof coating.

Contents:

• 1 Measurement device:
  • 7-segment display: 3-digit
  • Voltage ranges: 2 V DC and 20 V DC
  • Resolution: 1 mV
  • Input resistance: 200 MOhm
  • Accumulator operation: approx. 10 hours of operation after charging
  • pH combined electrode: unbreakable, with BNC plug and highly flexible cable
  • 3 V adapter
  • Plug-in power unit 12 V AC / 580 mA for 230 V AC mains voltage
• Foam-lined storage box
• 19 electrodes (42 mm x 28 mm)
• Cell blocks:
  • 2 Ag
  • 4 Zn
  • 2 Fe
  • 2 C
  • 2 AI
  • 2 Ni
  • 4 Cu electrodes
  • 1 Pt gauze electrode
• Magnesium strip and 1 plastic plate
• 2 cell blocks made of resistant plastic, each with 4 half-cells, allowing a simultaneous configuration of 4 galvanic elements. These elements are connected electrically to each other via strips of filter paper acting as membranes
• Set of filter papers (50 units)
• Emery stick
• 6 experiment cables each with a 2-mm-plug, 20 cm long
• 2 experiment cables each with a 2-mm-plug, 30 cm long
• 6 tapping clips
• 2 plastic beakers, 25 ml each
• 2 drip pipettes with rubber caps
• pH combined electrode with a BNC plug and highly flexible cable
• Operating instructions
• Experiment literature